Difference between revisions of "ULS PLS4.75 Laser Cutter"

From Design and Build Lab
Jump to navigation Jump to search
(NEVER CUT THESE)
(Added more approved materials and precautions)
 
(8 intermediate revisions by 4 users not shown)
Line 1: Line 1:
 
[[File:Ulspls4.75lasercutter.JPG|right|350px|alt="Laser Cutter"]]
 
[[File:Ulspls4.75lasercutter.JPG|right|350px|alt="Laser Cutter"]]
  
The Universal Laser Systems PLS4.75 (PLS) is our 2D laser cutter.
+
''(We offer a [[Introduction to 2D laser cutting with the Universal PLS4.75 Laser Cutter|workshop]] to allow members the use of the PLS4.75. Generally during the semester, it is offered once a week.)''
  
Generally, a laser cutter is a subtractive manufacturing machine. Using a combination of heat and pressure, the laser is able to cut stock with extreme quality and precision. Due to its large bed size, the laser cutter is most useful for project where you need either a very precise subtractive process or need to cut stock that is too large for our other subtractive devices like the [[Bantam Tools PCB Mill|CNC Mill]].
+
The '''Universal Laser Systems PLS4.75''' is a 2D [[Manufacturing techniques#Subtractive manufacturing|subtractive manufacturing]] laser cutter machine. A '''laser cutter''' uses a focused, high power column of photons cut stock with extreme quality and precision. Due to its large bed size, the laser cutter is most useful for project where you need either a very precise subtractive process or need to cut stock that is too large for our other subtractive devices, like the [[Bantam Tools PCB Mill|Bantam Tools PCB Mill]].
 +
==Safety==
 +
All laser cutters are dangerous machines. There are a host of safety checks in place to make sure that the machine operates as safely as possible, but as the operator, you must also be mindful. There are four important precautions to take when using this machine:
  
 
+
#'''Never run the laser cutter without the filtration/exhaust unit running.'''
To read about our introductory workshop for the PLS click [[Introduction to 2D laser cutting with the Universal PLS4.75 Laser Cutter|here]].
+
#'''Never stare into the laser.'''
 +
#'''Never cut anything that isn't on the [[ULS PLS4.75 Laser Cutter#Materials|list of approved materials]]'''.
 +
#'''NEVER LEAVE THE LASER CUTTER UNATTENDED WHILE RUNNING.''' This machine is susceptible to fire, and walking away from a running job will result in you losing you laser cutter access.
 +
#If using mirror material, '''never have the mirror facing up'''. The laser may bounce off the mirror. Make sure the dull side faces you.
  
 
==Materials==
 
==Materials==
Line 30: Line 35:
 
|Emits cyanide gas.
 
|Emits cyanide gas.
 
|Tends to melt instead of cut. But you'll be dead so it won't matter.
 
|Tends to melt instead of cut. But you'll be dead so it won't matter.
|-
 
|
 
|
 
|
 
|
 
|
 
 
|}
 
|}
  
Line 68: Line 67:
 
|
 
|
 
|Watch for fire.
 
|Watch for fire.
 +
|-
 +
|Leather
 +
|Consider our custom Leather.las setting
 +
|Watch for fire and material warping.
 +
|-
 +
|Rubber
 +
|
 +
|Watch for fire.
 +
|-
 +
|Felt
 +
|Consider our custom Felt.las setting
 +
|
 
|}
 
|}
  
Line 73: Line 84:
 
Check with a [[Creative and Technical Specialist|CaTS]] to make sure your material is cuttable. '''DO NOT CUT ANYTHING THAT IS NOT ON THE APPROVED LIST WITHOUT FIRST GETTING APPROVAL.'''
 
Check with a [[Creative and Technical Specialist|CaTS]] to make sure your material is cuttable. '''DO NOT CUT ANYTHING THAT IS NOT ON THE APPROVED LIST WITHOUT FIRST GETTING APPROVAL.'''
  
 +
==Machine Specs==
 +
'''Bed size''': 457mm x 609mm (18in x 24in)
 +
 +
==How to use==
 +
if you would like to learn how to use the PLS4.75 or need a refresher, see the [[Introduction to 2D laser cutting with the Universal PLS4.75 Laser Cutter|workshop]] page.
 
==External Links==
 
==External Links==
More information about materials can be found [[here]].
+
An extended list of materials with more information can be found [https://www.ulsinc.com/material/materials-library here].
 
 
An extended list of materials [[here]].
 

Latest revision as of 19:10, 12 February 2020

"Laser Cutter"

(We offer a workshop to allow members the use of the PLS4.75. Generally during the semester, it is offered once a week.)

The Universal Laser Systems PLS4.75 is a 2D subtractive manufacturing laser cutter machine. A laser cutter uses a focused, high power column of photons cut stock with extreme quality and precision. Due to its large bed size, the laser cutter is most useful for project where you need either a very precise subtractive process or need to cut stock that is too large for our other subtractive devices, like the Bantam Tools PCB Mill.

Safety

All laser cutters are dangerous machines. There are a host of safety checks in place to make sure that the machine operates as safely as possible, but as the operator, you must also be mindful. There are four important precautions to take when using this machine:

  1. Never run the laser cutter without the filtration/exhaust unit running.
  2. Never stare into the laser.
  3. Never cut anything that isn't on the list of approved materials.
  4. NEVER LEAVE THE LASER CUTTER UNATTENDED WHILE RUNNING. This machine is susceptible to fire, and walking away from a running job will result in you losing you laser cutter access.
  5. If using mirror material, never have the mirror facing up. The laser may bounce off the mirror. Make sure the dull side faces you.

Materials

NEVER CUT THESE

Some materials, when used on the laser cutter, produce chemicals that are extremely hazardous and deadly to ingest. The following materials should NEVER be used on our system.

Material Other names Common objects Danger Notes
PVC Polyvinyl chloride, vinyl Vinyl from the vinyl cutter, pipes, water-resistant clothing, imitation leather, canvas Emits chlorine gas. Ruins the optics and corrodes the machine as well. But you'll be dead so it won't matter.
ABS Acrylonitrile butadiene styrene Almost anything which has been injection molded is either ABS or HDPE. Emits cyanide gas. Tends to melt instead of cut. But you'll be dead so it won't matter.

Approved

The following materials are allowed to be used on the laser cutter and can be found within DaBL.

Material Notes Warnings
Acrylic Cast acrylic will etch, extruded will not.
Many solid woods Avoid oily or resinous woods, as they have a tendency to catch fire.
Plywood and composite woods Glues will reduce efficacy of laser cut.
MDF and engineered woods More charring than other wood products.
Paper Cut a single layer at a time to avoid fire.
Cardboard Watch for fire.
Leather Consider our custom Leather.las setting Watch for fire and material warping.
Rubber Watch for fire.
Felt Consider our custom Felt.las setting

What if what I want to cut isn't listed?

Check with a CaTS to make sure your material is cuttable. DO NOT CUT ANYTHING THAT IS NOT ON THE APPROVED LIST WITHOUT FIRST GETTING APPROVAL.

Machine Specs

Bed size: 457mm x 609mm (18in x 24in)

How to use

if you would like to learn how to use the PLS4.75 or need a refresher, see the workshop page.

External Links

An extended list of materials with more information can be found here.