Difference between revisions of "Universal Control Panel (software)"
Jump to navigation
Jump to search
(first pass) (Tag: Visual edit) |
Meagan mitch (talk | contribs) (→Design Parameters) (Tag: Visual edit) |
||
Line 1: | Line 1: | ||
Universal Control Panel (UCP) is a [[Computer-aided manufacturing|CAM]] package which works with the [[ULS PLS4.75 Laser Cutter|ULS PLS4.75]]. | Universal Control Panel (UCP) is a [[Computer-aided manufacturing|CAM]] package which works with the [[ULS PLS4.75 Laser Cutter|ULS PLS4.75]]. | ||
− | == Design Parameters == | + | ==Design Parameters== |
UCP requires specific design parameters. You'll need to set these in the 2D vector drawing program. Specifically: | UCP requires specific design parameters. You'll need to set these in the 2D vector drawing program. Specifically: | ||
Line 11: | Line 11: | ||
#Red and Blue are only used for strokes. | #Red and Blue are only used for strokes. | ||
#Black can be used for stroke and/or path. | #Black can be used for stroke and/or path. | ||
− | #If strokes are Red or Blue, the ''must'' be 0.025mm | + | #If strokes are Red or Blue, the width ''must'' be 0.025mm. |
#Any text must be converted into paths prior to sending to UCP. In Inkscape, this can be done by selecting the text and navigating ''Path --> Object to Path''. | #Any text must be converted into paths prior to sending to UCP. In Inkscape, this can be done by selecting the text and navigating ''Path --> Object to Path''. |
Revision as of 22:54, 1 October 2019
Universal Control Panel (UCP) is a CAM package which works with the ULS PLS4.75.
Design Parameters
UCP requires specific design parameters. You'll need to set these in the 2D vector drawing program. Specifically:
- The document must be in RGB color mode in order for colors to be read properly.
- Explicitly, you may only use three colors for objects:
- Red (255, 0, 0)
- Blue (0, 0, 255)
- Black (0, 0, 0)
- Red and Blue are only used for strokes.
- Black can be used for stroke and/or path.
- If strokes are Red or Blue, the width must be 0.025mm.
- Any text must be converted into paths prior to sending to UCP. In Inkscape, this can be done by selecting the text and navigating Path --> Object to Path.