Changes

== Sketching a Fidget Spinner steps ==

# Design fidget spinner, one hole in center and 3 polygons# Measure the size of the bearing with a set of calipers in mm# Create sketch dimension or press d# Click anywhere on the perimeter and then anywhere to stick the label and then 22mm, for example.# What we made is a hole, so we should add some material to this. Under modify there is offset, click on the sketch curve that you would like to offset and offset position 4 mm, then click ok.# Now we want the polygon to be semmetric symmetric to any line coming from the center of circle.# Draw a line from orgin origin along y-axis# Create line pressing L# The line is a sketch line, just using it as a reference, and we dont don't want it to be a feature of the sketch# In fusion a construction line is a refernce reference feature# when the line is selected it turns dashed# Move it over by applying constraints, the constraint that we are looking for is a coincident constraint, the two points are coincident, select the two things you want to be coincident and then select coincident.# Then we want a perpidincular perpendicular constraint.# Create sketch dimension and then 10 centimeters a side# At this point, it not fully constrained.# Create dimension for the center line and extend it to the left# Offset for polygon 3mm# Circlular Circular pattern tool, objects you want to be created, drag select from left to right# Select the center point and and the triangle, you can change how far around the circle you would like to patter, just 3# Filet the edges# Option to rewind through time at the bottom left

*'''Surface''': a A Face that need not be flat*'''Sketch''': digital Digital drawing consisting of Curves. == Online Tools == * '''Select Tool:''' last icon to the right on top row with a mouse** Allows one to grab and object* '''Extrude:''' 2nd icon from left in Create, 3D rectangle with up arrow** Brings depth to a 2D object* '''Hole:''' 4th icon from left in Create, 3D square with circular hole** Creates a hole in the 3D object* '''Rectangular Pattern:''' 5th icon from left in Create, four mini squares attached into a square** Duplicate faces, bodies, features...* '''Press Pull:''' 1st icon from left in Modify, rectangle pulling wide with arrow** Can stretch or cut an object* '''Fillet:''' 2nd icon from left in Modify, curved triangle** Added features to the edges* '''Shell:''' 3rd icon from left in Modify, 3D square with square hole** hollows out inside of a 3D object

#use Use sketch tools to create lines, arch's, circles, circular pattern, offset, set dimensions, create constraints, and inscribed polygons