Difference between revisions of "Workshop: Introduction to 3D CAD (with Fusion 360)"

From Design and Build Lab
Jump to navigation Jump to search
m (Kristof moved page Introdution to 3D CAD (with Fusion 360) to Introduction to 3D CAD (with Fusion 360) without leaving a redirect: correct spelling)
Line 1: Line 1:
−
Start page.
+
Typical workflow:
 +
# Create a sketch
 +
# Extrude the sketch
 +
# Modify body
 +
# Export
 +
 
 +
Creating a sketch
 +
# Select a surface to sketch on (plane or face of object)
 +
# Draw components (lines, circles, et al)
 +
# Specify dimensions
 +
# Apply constraints
 +
# Finish sketch
 +
 
 +
Extruding a sketch
 +
# Select sketch
 +
# Select parameters
 +
# Finish
 +
 
 +
Modifying bodies
 +
# Fillets/chamfers
 +
# Combining bodies
 +
 
 +
Exporting
 +
# Select object
 +
# Select destination
 +
# Export

Revision as of 01:24, 5 February 2018

Typical workflow:

  1. Create a sketch
  2. Extrude the sketch
  3. Modify body
  4. Export

Creating a sketch

  1. Select a surface to sketch on (plane or face of object)
  2. Draw components (lines, circles, et al)
  3. Specify dimensions
  4. Apply constraints
  5. Finish sketch

Extruding a sketch

  1. Select sketch
  2. Select parameters
  3. Finish

Modifying bodies

  1. Fillets/chamfers
  2. Combining bodies

Exporting

  1. Select object
  2. Select destination
  3. Export
Retrieved from "http://designandbuildlab.com/wiki/index.php?title=Workshop:_Introduction_to_3D_CAD_(with_Fusion_360)&oldid=74"