310
edits
Changes
Jump to navigation
Jump to search
update workshop checklist to conform to standard pedagogy.
Now turn off your iron, and return all the tools back to their rightful positions in the shop - ''but be mindful of the iron, cradle, and station''. The iron needs to cool down before storing it. Let it sit for five to ten minutes, and then pack it up as well.
==Workshop checklist==
===Learning Objectives===
By the end of this Workshop, you should:
#understand the relationship between voltage, current, and resistance.
#know how to identify different electronic components.
#understand the difference between series and parallel systems.
#understand how a breadboard works.
#recognize the dangerous elements of the soldering station.
===Measurable Outcomes===
By the end of this Workshop, you should be able to:
#apply Ohm's Law to solve for an unknown quantity.
#identify circuit elements in series and in parallel.
#use a breadboard to connect various components.
#use a soldering station to solder components onto a basic printed circuit board.
