Changes

# Turn on the heat press by flipping the switch on the left side of the device## The digital display will light up, depicting the device’s current temperature and the device’s goal temperature.## You can modify the goal temperature by pressing the black “Reset” button below the display. Then using the up and down arrow buttons. Confirm the new temperature by pressing “Ok”.## Once the goal temperature is reached, the machine is ready for use.# Pull the roll-out bed towards you# Place your material on the bed, ensuring the surface is flat. ## If you are transferring to a fabric, iron out an wrinkles for best results!# Place your design on top of the material where you want it transferred. And cover it with the plastic heating sheet. # Firmly pull the black lever down all the way until it clicks into place.# A timer will automatically start (ask a CaTS for time suggestions based for your material). The lever will pop back open automatically when the timer finishes.