137
edits
Changes
Jump to navigation
Jump to search
added a little thing making sure that people have the right parameters before cutting
The Universal Laser Systems PLS4.75 Laser Cutter is a subtractive manufacturing machine which cuts many different organic materials. It's also dead simple to use once you know the procedure. Upon attending and successfully completing this Workshop, you will be approved to use the PLS4.75 Laser Cutter without supervision.
== Before you cut ==
Make sure that your CAD is within this specific set of parameters
# The width of the cut is .025 mm
# It is within the RBG scale and it is either 255 red, blue, and or black
==Safety==
In reverse order to how you started, first turn off the laser cutter, then the filtration/exhaust. Congratulations on your lasering!
=== Clean work area ===
If a significant amount of material fell through the honey comb structure of the cutting table then it should be cleaned out. The front of the laser cutting can be opened and the table will slide out. There is an opening in the rear of the table that can be used to clean the inside.
