18
edits
Changes
Jump to navigation
Jump to search
→Print
==Print==
#Remove the SD card from the Prusa screen#*Take SD card to computer and insert into USB reader#*Open up Cura (last icon on taskbar) and select ''Prusa I3 MK3S'' in left top corner next to the folder symbol#*The blue rectangle in the right hand bottom corner, click "Save to Removable..."#*Once it has saved, click "Eject Removable Desk" in same right hand bottom corner#Carefully insert it SD card back into the 3D printer and allow the machine to process.
#Scroll to your generated G--code file and press the knob.
#The machine will begin its job!
Always leave the machine cleaner than what you found it! Before you walk away from the machine, make sure to:
# Clean up any clipped filament and stray support material not already on the bed.# For the bed:## Remove any remaining support, adhesion, or clearing filament still on the bed.## If a gluestick was used, wash the bed with warm water and handsoap only to remove it. '''Do not use anything on the bed other than soap, water, and paper towels'''.
This will ensure the machine is clean for the next person to work with!
