18
edits
Changes
Jump to navigation
Jump to search
#*Take SD card to computer and insert into USB reader
#*Open up Cura (last icon on taskbar) and select ''Prusa I3 MK3S'' in left top corner next to the folder symbol
#*The blue rectangle in the right hand bottom corner, click "Save to Removable..."
#*Once it has saved, click "Eject Removable Desk" in same right hand bottom corner
→Print
#Pull the SD card from the lefthand side of the 3D printer screen enclosure and insert it into the SD card reader USB stick connected to the front face of the computer.
#Badge in to the computer.
#Start Cura(last icon (light blue) on taskbar).
#Open your stl model. It should appear in the build area.
#In the top left of the interface:
###Typical setting: brim
#In the bottom right of the interface, press the large button labelled "Save to Removable Disk".
#Once it has saved, click "Eject Removable Desk" in the bottom middle<br /> You're ready to go!
==Print==
#Remove the SD card from Prusa screen
#Carefully insert SD card back into the 3D printer and allow the machine to process.
#Scroll to your generated G--code file and press the knob.
