All public logs
Jump to navigation
Jump to search
Combined display of all available logs of Design and Build Lab. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
(newest | oldest) View (newer 500 | older 500) (20 | 50 | 100 | 250 | 500)- 20:51, 9 October 2019 Meagan mitch (talk | contribs) uploaded File:Moving image to laser tool.png
- 20:51, 9 October 2019 Meagan mitch (talk | contribs) created page File:Moving image to laser tool.png
- 20:49, 8 October 2019 Beau (talk | contribs) moved page Inkscape (Open Source) to Inkscape (Software)
- 20:49, 8 October 2019 Beau (talk | contribs) moved page Autodesk Eagle to Eagle (Software) (fix name)
- 20:38, 8 October 2019 Beau (talk | contribs) created page Autodesk Eagle (Knowledge page on basic Eagle things)
- 20:23, 8 October 2019 Beau (talk | contribs) created page Inkscape (Open Source) (Knowlegebase page for inkscape)
- 21:05, 7 October 2019 JosephM (talk | contribs) created page File:Reshape Example.png
- 21:05, 7 October 2019 JosephM (talk | contribs) uploaded File:Reshape Example.png
- 21:19, 3 October 2019 Joshw (talk | contribs) uploaded File:Slide13.png
- 21:19, 3 October 2019 Joshw (talk | contribs) created page File:Slide13.png
- 20:57, 3 October 2019 Joshw (talk | contribs) uploaded File:Slide12.png
- 20:57, 3 October 2019 Joshw (talk | contribs) created page File:Slide12.png
- 20:55, 3 October 2019 Joshw (talk | contribs) uploaded File:Slide11.png
- 20:55, 3 October 2019 Joshw (talk | contribs) created page File:Slide11.png
- 20:44, 3 October 2019 Joshw (talk | contribs) uploaded File:Slide10.png
- 20:44, 3 October 2019 Joshw (talk | contribs) created page File:Slide10.png
- 20:31, 3 October 2019 Joshw (talk | contribs) uploaded File:Slide9.png
- 20:31, 3 October 2019 Joshw (talk | contribs) created page File:Slide9.png
- 20:21, 3 October 2019 Joshw (talk | contribs) uploaded File:Slide8.png
- 20:21, 3 October 2019 Joshw (talk | contribs) created page File:Slide8.png
- 20:18, 3 October 2019 Joshw (talk | contribs) uploaded File:Soolder.png
- 20:18, 3 October 2019 Joshw (talk | contribs) created page File:Soolder.png
- 20:15, 3 October 2019 Joshw (talk | contribs) uploaded File:Solder.png
- 20:15, 3 October 2019 Joshw (talk | contribs) created page File:Solder.png
- 20:12, 3 October 2019 Joshw (talk | contribs) uploaded File:Stuff.png
- 20:12, 3 October 2019 Joshw (talk | contribs) created page File:Stuff.png
- 20:09, 3 October 2019 Joshw (talk | contribs) uploaded File:Compo.png
- 20:09, 3 October 2019 Joshw (talk | contribs) created page File:Compo.png
- 20:04, 3 October 2019 Joshw (talk | contribs) uploaded File:Parts.png
- 20:04, 3 October 2019 Joshw (talk | contribs) created page File:Parts.png
- 19:44, 3 October 2019 Joshw (talk | contribs) uploaded File:Slide1n.png
- 19:44, 3 October 2019 Joshw (talk | contribs) created page File:Slide1n.png
- 19:41, 3 October 2019 Joshw (talk | contribs) uploaded File:BSlide1.png
- 19:41, 3 October 2019 Joshw (talk | contribs) created page File:BSlide1.png
- 19:40, 3 October 2019 Joshw (talk | contribs) uploaded File:Slide1.png
- 19:40, 3 October 2019 Joshw (talk | contribs) created page File:Slide1.png
- 22:25, 30 September 2019 JosephM (talk | contribs) uploaded File:Numpy.matrix.png
- 22:25, 30 September 2019 JosephM (talk | contribs) created page File:Numpy.matrix.png
- 22:24, 30 September 2019 JosephM (talk | contribs) uploaded File:Numpy zeros.png
- 22:24, 30 September 2019 JosephM (talk | contribs) created page File:Numpy zeros.png
- 21:08, 30 September 2019 JosephM (talk | contribs) uploaded File:Np example.png
- 21:08, 30 September 2019 JosephM (talk | contribs) created page File:Np example.png
- 21:07, 30 September 2019 JosephM (talk | contribs) uploaded File:NumPy example documentation.png
- 21:07, 30 September 2019 JosephM (talk | contribs) created page File:NumPy example documentation.png
- 21:01, 30 September 2019 JosephM (talk | contribs) created page Workshop: Advanced Computation (with Python) (Created page with "Modules and Packages Modules and packages are a feature of Python wherein, you can import subtasks (or modules) into your code. Using modules and packages leads to cleaner cod...")
- 22:27, 26 September 2019 Joshw (talk | contribs) created page File:Component.png
- 22:27, 26 September 2019 Joshw (talk | contribs) uploaded File:Component.png
- 20:55, 19 September 2019 Joshw (talk | contribs) created page Prusa i3 MK3S 3D Printer (create the skeleton of the Prusa i3 MK3s 3D printer) (Tag: Visual edit)
- 16:10, 19 September 2019 Kristof (talk | contribs) moved page Introduction to 3D printing with the Prusa I3 MK3S 3D Printer to Workshop: Introduction to 3D printing with the Prusa I3 MK3S 3D Printer
- 16:02, 19 September 2019 Kristof (talk | contribs) created page Template:Workshop header (create workshop header template)
- 16:00, 19 September 2019 Kristof (talk | contribs) created page Template:Foo (test templating)
- 21:35, 18 September 2019 JosephM (talk | contribs) uploaded File:Magic Conch Logic Flowchart.png
- 21:35, 18 September 2019 JosephM (talk | contribs) created page File:Magic Conch Logic Flowchart.png
- 20:58, 18 September 2019 Kristof (talk | contribs) created page Introduction to 3D printing with the Prusa I3 MK3S 3D Printer (start overhaul of workshop. needs quite a bit more TLC) (Tag: Visual edit)
- 19:17, 17 September 2019 Joshw (talk | contribs) uploaded File:Prusa.png
- 19:17, 17 September 2019 Joshw (talk | contribs) created page File:Prusa.png
- 21:19, 16 September 2019 JosephM (talk | contribs) uploaded File:If statement example.png
- 21:19, 16 September 2019 JosephM (talk | contribs) created page File:If statement example.png
- 16:10, 16 September 2019 Kristof (talk | contribs) created page Fusion360 (software) (create page) (Tag: Visual edit)
- 16:02, 16 September 2019 Kristof (talk | contribs) created page Universal Control Panel (software) (first pass) (Tag: Visual edit)
- 18:16, 13 September 2019 Beau (talk | contribs) uploaded File:Bit5.PNG (inkscape bit-mapping tutorial img 5)
- 18:16, 13 September 2019 Beau (talk | contribs) created page File:Bit5.PNG (inkscape bit-mapping tutorial img 5)
- 18:16, 13 September 2019 Beau (talk | contribs) uploaded File:Bit4.PNG (inkscape bit-mapping tutorial img 4)
- 18:16, 13 September 2019 Beau (talk | contribs) created page File:Bit4.PNG (inkscape bit-mapping tutorial img 4)
- 18:16, 13 September 2019 Beau (talk | contribs) uploaded File:Bit3.png (inkscape bit-mapping tutorial img 3)
- 18:16, 13 September 2019 Beau (talk | contribs) created page File:Bit3.png (inkscape bit-mapping tutorial img 3)
- 18:03, 13 September 2019 Beau (talk | contribs) uploaded File:Bit2.png (inkscape bit-mapping tutorial img 2)
- 18:03, 13 September 2019 Beau (talk | contribs) created page File:Bit2.png (inkscape bit-mapping tutorial img 2)
- 18:03, 13 September 2019 Beau (talk | contribs) uploaded File:Bit1.png (inkscape bit-mapping tutorial img 1)
- 18:03, 13 September 2019 Beau (talk | contribs) created page File:Bit1.png (inkscape bit-mapping tutorial img 1)
- 22:06, 12 September 2019 JosephM (talk | contribs) created page File:Break Flowchart.jpg
- 22:06, 12 September 2019 JosephM (talk | contribs) uploaded File:Break Flowchart.jpg
- 22:05, 12 September 2019 JosephM (talk | contribs) uploaded File:Continue Flow Chart.jpg
- 22:05, 12 September 2019 JosephM (talk | contribs) created page File:Continue Flow Chart.jpg
- 16:54, 12 September 2019 Kristof (talk | contribs) moved page Knowledgebase Resources to Learning Resources (better name for page)
- 16:39, 12 September 2019 Kristof (talk | contribs) moved page Equipment Status to Equipment Resources
- 20:02, 10 September 2019 User account Beau (talk | contribs) was created by Kristof (talk | contribs)
- 22:56, 9 September 2019 JosephM (talk | contribs) uploaded File:Example For loop.png
- 22:56, 9 September 2019 JosephM (talk | contribs) created page File:Example For loop.png
- 22:50, 9 September 2019 JosephM (talk | contribs) uploaded File:While Loop Example.png
- 22:50, 9 September 2019 JosephM (talk | contribs) created page File:While Loop Example.png
- 22:10, 9 September 2019 JosephM (talk | contribs) uploaded File:Example of Append.png
- 22:10, 9 September 2019 JosephM (talk | contribs) created page File:Example of Append.png
- 21:02, 9 September 2019 JosephM (talk | contribs) uploaded File:Hello World Executed.png
- 21:02, 9 September 2019 JosephM (talk | contribs) created page File:Hello World Executed.png
- 20:54, 9 September 2019 JosephM (talk | contribs) created page File:Hello world example.png
- 20:54, 9 September 2019 JosephM (talk | contribs) uploaded File:Hello world example.png
- 20:19, 3 September 2019 Kristof (talk | contribs) moved page Make a Paper Circuit! to Activity: Make a Paper Circuit!
- 20:18, 3 September 2019 Kristof (talk | contribs) moved page Create a puzzle! to Activity: Create a puzzle!
- 20:18, 3 September 2019 Kristof (talk | contribs) moved page Workshop: Learn how to Solder! to Activity: Learn how to Solder! (reclassify)
- 20:26, 24 July 2019 Charles (talk | contribs) uploaded File:Starpuzzle.png
- 20:26, 24 July 2019 Charles (talk | contribs) created page File:Starpuzzle.png
- 20:25, 24 July 2019 Charles (talk | contribs) uploaded File:Strokestyle.png
- 20:25, 24 July 2019 Charles (talk | contribs) created page File:Strokestyle.png
- 17:47, 24 July 2019 Charles (talk | contribs) uploaded File:Inkscape RGB.png
- 17:47, 24 July 2019 Charles (talk | contribs) created page File:Inkscape RGB.png
- 17:38, 24 July 2019 Charles (talk | contribs) uploaded File:Puzzle menu.png
- 17:38, 24 July 2019 Charles (talk | contribs) created page File:Puzzle menu.png
- 16:57, 24 July 2019 Charles (talk | contribs) created page Create a puzzle! (Created page with "This page serves as a guide to creating your own custom puzzle in DaBL! ==Materials==")
- 19:40, 23 July 2019 Charles (talk | contribs) uploaded File:Soldering Components.jpg
- 19:40, 23 July 2019 Charles (talk | contribs) created page File:Soldering Components.jpg
- 19:34, 23 July 2019 Charles (talk | contribs) created page File:Basic Soldering.jpg
- 19:34, 23 July 2019 Charles (talk | contribs) uploaded File:Basic Soldering.jpg
- 21:59, 18 July 2019 Charles (talk | contribs) moved page List of workshops to List of activities (reclassification)
- 21:44, 18 July 2019 Charles (talk | contribs) moved page Make a Paper Circuit thing! to Make a Paper Circuit!
- 21:36, 18 July 2019 Charles (talk | contribs) moved page Learn how to hot wire cut foam! to Activity: How to use the hot wire foam cutter!
- 21:30, 18 July 2019 Charles (talk | contribs) uploaded File:Hot Wire Foam Cutter.jpg
- 21:30, 18 July 2019 Charles (talk | contribs) created page File:Hot Wire Foam Cutter.jpg
- 18:26, 13 July 2019 Joshw (talk | contribs) created page Make a Paper Circuit thing! (wrote basic outline) (Tag: Visual edit)
- 17:36, 13 July 2019 Joshw (talk | contribs) created page Learn how to hot wire cut foam! (minor edit) (Tag: Visual edit)
- 15:25, 12 June 2019 JimmyD (talk | contribs) created page Prusa I3 Mk3s 3D Printer Maintenance (Created page with "* Make sure to check each belt for tightness ** Should make a guitar like twang when each belt is plucked * Check nuts and bolts for tightness, they could wiggle loose after a...") (Tag: Visual edit)
- 20:40, 4 June 2019 User account Jlusci (talk | contribs) was created by Kristof (talk | contribs)
- 20:32, 8 May 2019 Kristof (talk | contribs) moved page Learn how to Solder! to Workshop: Learn how to Solder! (retitle for better organization)
- 20:32, 8 May 2019 Kristof (talk | contribs) moved page Introduction to Machine Sewing to Workshop: Introduction to Machine Sewing (retitle for better organization)
- 20:32, 8 May 2019 Kristof (talk | contribs) moved page Introduction to Microcontrollers with Arduino to Workshop: Introduction to Microcontrollers with Arduino (retitle for better organization)
- 20:31, 8 May 2019 Kristof (talk | contribs) moved page Introduction to 3D printing with the Type A Series 1 Pro Printer to Workshop: Introduction to 3D printing with the Type A Series 1 Pro Printer (retitle for better organization)
- 20:31, 8 May 2019 Kristof (talk | contribs) moved page Introduction to 2D laser cutting with the Universal PLS4.75 Laser Cutter to Workshop: Introduction to 2D laser cutting with the Universal PLS4.75 Laser Cutter (retitle for better organization)
- 20:31, 8 May 2019 Kristof (talk | contribs) moved page Introduction to 2D vector cutting with the GCC Jaguar VLX Vinyl Cutter to Workshop: Introduction to 2D vector cutting with the GCC Jaguar VLX Vinyl Cutter (retitle for better organization)
- 20:31, 8 May 2019 Kristof (talk | contribs) moved page Introduction to milling with the Bantam Tools PCB Mill to Workshop: Introduction to milling with the Bantam Tools PCB Mill (retitle for better organization)
- 20:31, 8 May 2019 Kristof (talk | contribs) moved page Introduction to Fabric Design to Workshop: Introduction to Fabric Design (retitle for better organization)
- 20:31, 8 May 2019 Kristof (talk | contribs) moved page Introduction to programming (with Python) to Workshop: Introduction to programming (with Python) (retitle for better organization)
- 20:30, 8 May 2019 Kristof (talk | contribs) moved page Introduction to version control to Workshop: Introduction to version control (retitle for better organization)
- 20:30, 8 May 2019 Kristof (talk | contribs) moved page Introduction to electronics to Workshop: Introduction to electronics (retitle for better organization)
- 20:30, 8 May 2019 Kristof (talk | contribs) moved page Introduction to circuit design (with EAGLE) to Workshop: Introduction to circuit design (with EAGLE) (retitle for better organization)
- 20:30, 8 May 2019 Kristof (talk | contribs) moved page Introduction to 3D CAD (with Blender) to Workshop: Introduction to 3D CAD (with Blender) (retitle for better organization)
- 20:29, 8 May 2019 Kristof (talk | contribs) moved page Introduction to 3D CAD (with Fusion 360) to Workshop: Introduction to 3D CAD (with Fusion 360) (reclassification for better organization)
- 20:29, 8 May 2019 Kristof (talk | contribs) moved page Introduction to 2D CAD (with Inkscape) to Workshop: Introduction to 2D CAD (with Inkscape) (reclassification for better organization)
- 20:28, 8 May 2019 Kristof (talk | contribs) created page Electronics: sensors (store external link) (Tag: Visual edit)
- 21:02, 2 May 2019 Kristof (talk | contribs) created page Knowledgebase Resources (new page; move material from Main) (Tag: Visual edit)
- 20:16, 1 May 2019 Sarj0 (talk | contribs) created page Learn how to Solder! (Started the Solder Page, will continue adding!)
- 18:19, 8 April 2019 JimmyD (talk | contribs) uploaded File:Correct Alignment.jpg
- 18:19, 8 April 2019 JimmyD (talk | contribs) created page File:Correct Alignment.jpg
- 17:37, 8 April 2019 JimmyD (talk | contribs) uploaded File:Fully Reassembled.jpg
- 17:37, 8 April 2019 JimmyD (talk | contribs) created page File:Fully Reassembled.jpg
- 17:36, 8 April 2019 JimmyD (talk | contribs) uploaded File:Alignment test.jpg
- 17:36, 8 April 2019 JimmyD (talk | contribs) created page File:Alignment test.jpg
- 17:35, 8 April 2019 JimmyD (talk | contribs) uploaded File:Too much compund.jpg
- 17:35, 8 April 2019 JimmyD (talk | contribs) created page File:Too much compund.jpg
- 17:35, 8 April 2019 JimmyD (talk | contribs) uploaded File:Correct Seating of hot end.jpg
- 17:35, 8 April 2019 JimmyD (talk | contribs) created page File:Correct Seating of hot end.jpg
- 17:34, 8 April 2019 JimmyD (talk | contribs) uploaded File:Correct Amount.jpg
- 17:34, 8 April 2019 JimmyD (talk | contribs) created page File:Correct Amount.jpg
- 17:34, 8 April 2019 JimmyD (talk | contribs) uploaded File:Add new heatcompund.jpg
- 17:34, 8 April 2019 JimmyD (talk | contribs) created page File:Add new heatcompund.jpg
- 17:33, 8 April 2019 JimmyD (talk | contribs) uploaded File:Clean hotend.jpg
- 17:33, 8 April 2019 JimmyD (talk | contribs) created page File:Clean hotend.jpg
- 17:33, 8 April 2019 JimmyD (talk | contribs) uploaded File:Dirty Hotend.jpg
- 17:33, 8 April 2019 JimmyD (talk | contribs) created page File:Dirty Hotend.jpg
- 17:33, 8 April 2019 JimmyD (talk | contribs) uploaded File:Remove backfan.jpg
- 17:33, 8 April 2019 JimmyD (talk | contribs) created page File:Remove backfan.jpg
- 17:32, 8 April 2019 JimmyD (talk | contribs) uploaded File:Clean Setscrew.jpg
- 17:32, 8 April 2019 JimmyD (talk | contribs) created page File:Clean Setscrew.jpg
- 17:32, 8 April 2019 JimmyD (talk | contribs) uploaded File:Check Teeth.jpg
- 17:32, 8 April 2019 JimmyD (talk | contribs) created page File:Check Teeth.jpg
- 17:31, 8 April 2019 JimmyD (talk | contribs) uploaded File:Do Not Remove.jpg
- 17:31, 8 April 2019 JimmyD (talk | contribs) created page File:Do Not Remove.jpg
- 17:31, 8 April 2019 JimmyD (talk | contribs) uploaded File:E Setscreew.jpg
- 17:31, 8 April 2019 JimmyD (talk | contribs) created page File:E Setscreew.jpg
- 17:30, 8 April 2019 JimmyD (talk | contribs) uploaded File:Hotend.jpg
- 17:30, 8 April 2019 JimmyD (talk | contribs) created page File:Hotend.jpg
- 17:30, 8 April 2019 JimmyD (talk | contribs) uploaded File:Remove HeatBlock.jpg
- 17:30, 8 April 2019 JimmyD (talk | contribs) created page File:Remove HeatBlock.jpg
- 17:29, 8 April 2019 JimmyD (talk | contribs) uploaded File:Remove Guide.jpg
- 17:29, 8 April 2019 JimmyD (talk | contribs) created page File:Remove Guide.jpg
- 17:28, 8 April 2019 JimmyD (talk | contribs) uploaded File:Remove Holder.jpg
- 17:28, 8 April 2019 JimmyD (talk | contribs) created page File:Remove Holder.jpg
- 17:28, 8 April 2019 JimmyD (talk | contribs) uploaded File:Remove Fan Holder.jpg
- 17:28, 8 April 2019 JimmyD (talk | contribs) created page File:Remove Fan Holder.jpg
- 17:27, 8 April 2019 JimmyD (talk | contribs) uploaded File:Start Picture.jpg
- 17:27, 8 April 2019 JimmyD (talk | contribs) created page File:Start Picture.jpg
- 14:35, 5 April 2019 Kristof (talk | contribs) moved page GCC Jaguar VLX vinyl cutter Maintenance to GCC Jaguar VLX Vinyl Cutter Maintenance without leaving a redirect (change name caps)
- 14:27, 5 April 2019 Kristof (talk | contribs) created page Equipment maintenance (list of all maintenance pages go here) (Tag: Visual edit)
- 19:24, 4 April 2019 Kristof (talk | contribs) deleted page Introduction to 3D CAD (with PreForm) (we aren't going to offer a workshop on Preform)
- 19:21, 4 April 2019 Kristof (talk | contribs) moved page Status page to Equipment Status (better name for page)
- 17:18, 4 April 2019 JimmyD (talk | contribs) created page Formlabs Form1+ Resin 3D Printer Maintenance (Created page with "==Cleaning== ===Daily Cleaning=== ===Monthly Cleaning=== ==Maintenance== ===Daily Maintenance=== ===Monthly Maintenance===") (Tag: Visual edit)
- 17:17, 4 April 2019 JimmyD (talk | contribs) created page GCC Jaguar VLX vinyl cutter Maintenance (Created page with "==Cleaning== ===Daily Cleaning=== ===Monthly Cleaning=== ==Maintenance== ===Daily Maintenance=== ===Monthly Maintenance===") (Tag: Visual edit)
- 17:16, 4 April 2019 JimmyD (talk | contribs) created page ULS PLS4.75 Laser Cutter Maintenance (Created page with "==Cleaning== ===Daily Cleaning=== ===Monthly Cleaning=== ==Maintenance== ===Daily Maintenance=== ===Monthly Maintenance===") (Tag: Visual edit)
- 17:16, 4 April 2019 JimmyD (talk | contribs) created page Type A Series 1 Pro 3D printer Maintenance (Created page with "==Cleaning== ===Daily Cleaning=== ===Monthly Cleaning=== ==Maintenance== ===Daily Maintenance=== ===Monthly Maintenance===") (Tag: Visual edit)
- 17:15, 4 April 2019 JimmyD (talk | contribs) created page Bantam Tools PCB Mill Maintenance (Created page with "== Cleaning == === Daily Cleaning === === Monthly Cleaning === == Maintenance == === Daily Maintenance === === Monthly Maintenance ===") (Tag: Visual edit)
- 21:45, 3 April 2019 Sarj0 (talk | contribs) created page Introduction to 3D CAD (with PreForm) (created page)
- 21:24, 3 April 2019 Sarj0 (talk | contribs) created page Formlabs Form1+ Resin 3D Printer (basic outline, will keep working)
- 16:49, 3 April 2019 Kristof (talk | contribs) deleted page Diezel Sun (from nonvalid user)
- 16:49, 3 April 2019 Kristof (talk | contribs) blocked Welix8 (talk | contribs) with an expiration time of indefinite (account creation disabled, cannot edit own talk page) (not a valid user)
- 09:42, 2 April 2019 Welix8 (talk | contribs) created page Diezel Sun (Created page with "DiezelSun - 3d modeller, game designer. Engaged in 3d modeling and development of the main menu for games. == Links ==") (Tags: Mobile edit, Mobile web edit)
- 09:05, 2 April 2019 User account Welix8 (talk | contribs) was created
- 23:15, 28 March 2019 User account Mabrinson10 (talk | contribs) was created by Meagan mitch (talk | contribs)
- 23:14, 28 March 2019 User account Egabriele (talk | contribs) was created by Meagan mitch (talk | contribs)
- 23:13, 28 March 2019 User account Meagan mitch (talk | contribs) was created
- 17:25, 27 March 2019 Joshw (talk | contribs) created page Status page (Created page with "Status of CNC machines")
- 16:23, 27 March 2019 Kristof (talk | contribs) moved page Introduction to 2D laser cutting with the Universal PLS4.75 to Introduction to 2D laser cutting with the Universal PLS4.75 Laser Cutter without leaving a redirect (better name)
- 18:14, 26 March 2019 JosephM (talk | contribs) uploaded File:Start Button.png
- 18:14, 26 March 2019 JosephM (talk | contribs) created page File:Start Button.png
- 17:45, 26 March 2019 JosephM (talk | contribs) uploaded File:Focus biutton.png
- 17:45, 26 March 2019 JosephM (talk | contribs) created page File:Focus biutton.png
- 17:37, 26 March 2019 JosephM (talk | contribs) uploaded File:Stock alignment.png
- 17:37, 26 March 2019 JosephM (talk | contribs) created page File:Stock alignment.png
- 17:20, 26 March 2019 Charles (talk | contribs) moved page Intermediate Fabric Design with Sewing Machine to Introduction to Machine Sewing (more descriptive title)
- 17:18, 26 March 2019 Charles (talk | contribs) moved page Intermediate 3D CAD (with Blender) to Introduction to 3D CAD (with Blender) (Change title to intro)
- 17:46, 22 March 2019 Charles (talk | contribs) uploaded File:Gccjaguarvlxvinylcutter.JPG
- 17:46, 22 March 2019 Charles (talk | contribs) created page File:Gccjaguarvlxvinylcutter.JPG
- 17:41, 22 March 2019 Charles (talk | contribs) uploaded File:Ulspls4.75lasercutter.JPG
- 17:41, 22 March 2019 Charles (talk | contribs) created page File:Ulspls4.75lasercutter.JPG
- 17:38, 22 March 2019 Charles (talk | contribs) uploaded File:Typeaseries1pro.JPG
- 17:38, 22 March 2019 Charles (talk | contribs) created page File:Typeaseries1pro.JPG
- 17:23, 22 March 2019 Charles (talk | contribs) uploaded File:Bantamtoolspcbmill.JPG
- 17:23, 22 March 2019 Charles (talk | contribs) created page File:Bantamtoolspcbmill.JPG
- 20:57, 21 March 2019 Alex M (talk | contribs) uploaded a new version of File:Fave Logo Box Small.png (Fixed Dimensions and Transparent Background)
- 21:00, 18 March 2019 Alex M (talk | contribs) uploaded a new version of File:Fave Logo Box Small.png
- 20:23, 18 March 2019 Alex M (talk | contribs) uploaded File:Fave Logo Box Small.png (Icon sized logo)
- 20:23, 18 March 2019 Alex M (talk | contribs) created page File:Fave Logo Box Small.png (Icon sized logo)
- 20:20, 18 March 2019 Kristof (talk | contribs) deleted page File:Atmega328pb pinout mod.png (only uploaded for test)
- 20:19, 18 March 2019 Kristof (talk | contribs) uploaded File:Atmega328pb pinout mod.png
- 20:19, 18 March 2019 Kristof (talk | contribs) created page File:Atmega328pb pinout mod.png
- 15:21, 14 March 2019 Kristof (talk | contribs) created page Resistance (first port; needs editing) (Tag: Visual edit)
- 23:38, 4 March 2019 Alex M (talk | contribs) uploaded File:Fave Logo Box.png (Design and Build Lab logo Designed by Alex Meves)
- 22:19, 3 March 2019 Kristof (talk | contribs) uploaded File:Git workflow team.gif (Git workflow for a team)
- 22:02, 3 March 2019 Kristof (talk | contribs) uploaded File:Poor project management.png (This is terrible.)
- 19:35, 21 February 2019 Kristof (talk | contribs) uploaded File:DaBL splash.jpg (Shot of DaBL's toolrack, a member, and a CaTS.)
- 14:20, 20 February 2019 Kristof (talk | contribs) uploaded File:Teensy 3.2 3.1 pinout.png (pinout for Teensy 3.2/3.1.)
- 17:23, 17 October 2018 User account Javian (talk | contribs) was created by Kristof (talk | contribs)
- 17:21, 4 October 2018 User account Charles (talk | contribs) was created by Kristof (talk | contribs)
- 19:29, 3 October 2018 User account Yongarber (talk | contribs) was created by Kristof (talk | contribs)
- 02:28, 29 September 2018 Kristof (talk | contribs) moved page Introduction to Micro-controllers with Arduino to Introduction to Microcontrollers with Arduino without leaving a redirect (remove hypen)
- 21:08, 27 September 2018 Joshw (talk | contribs) uploaded File:Code for teensy.png
- 17:41, 27 September 2018 User account Hale Stolberg (talk | contribs) was created by Kristof (talk | contribs)
- 16:26, 26 September 2018 User account JosephM (talk | contribs) was created by Kristof (talk | contribs)
- 19:06, 23 July 2018 Kristof (talk | contribs) deleted page Safety Waiver (waiver should be provided in person to make sure each member gets a full introduction.)
- 17:05, 13 July 2018 Alex M (talk | contribs) uploaded File:Stop sketch.jpg
- 16:38, 3 April 2018 User account EricaJurado (talk | contribs) was created by Kristof (talk | contribs) (For capstone)
- 16:13, 1 April 2018 Kristof (talk | contribs) moved page Specialist to Creative and Technical Specialist without leaving a redirect (title change)
- 17:20, 29 March 2018 User account JimmyD (talk | contribs) was created by Kristof (talk | contribs)
- 20:52, 22 February 2018 Kristof (talk | contribs) moved page Introduction to EDA (with EAGLE) to Introduction to circuit design (with EAGLE) without leaving a redirect (clarity)
- 01:43, 22 February 2018 Kristof (talk | contribs) uploaded File:DaBL Safety Waiver.pdf
- 01:42, 22 February 2018 Kristof (talk | contribs) deleted page File:DaBL Safety Waiver.pdf
- 01:42, 22 February 2018 Kristof (talk | contribs) uploaded File:DaBL Safety Waiver.pdf
- 01:42, 22 February 2018 Kristof (talk | contribs) deleted page File:DaBL Safety Waiver.pdf
- 01:41, 22 February 2018 Kristof (talk | contribs) uploaded a new version of File:DaBL Safety Waiver.pdf
- 19:47, 19 February 2018 Kristof (talk | contribs) moved page CAD and CAM to Computer-aided design without leaving a redirect (split CAD and CAM)
- 18:27, 19 February 2018 Kristof (talk | contribs) moved page Utilizing version control to Introduction to version control without leaving a redirect (Merge and refactor)
- 18:27, 19 February 2018 Kristof (talk | contribs) deleted page Version control (merged with "utilizing version control")
- 18:23, 19 February 2018 Kristof (talk | contribs) uploaded File:Gitworkflow.png (Source: Taken from http://files.zeroturnaround.com/pdf/zt_git_cheat_sheet.pdf)
- 21:58, 15 February 2018 Kristof (talk | contribs) moved page Specialists to Specialist without leaving a redirect (singular)
- 21:56, 15 February 2018 Kristof (talk | contribs) moved page People who Help Design (phd) to Specialists without leaving a redirect (title change)
- 16:35, 15 February 2018 Alex M (talk | contribs) uploaded File:Sketch planes.png (This is what you will see when selecting the Create Sketch icon initially. The transparent yellow boxes represent the planes (X, Y, Z) of the 3D space.)
- 15:22, 12 February 2018 Joshw (talk | contribs) uploaded a new version of File:Screen Shot 2018-02-12 at 10.17.52 AM.png
- 15:20, 12 February 2018 Joshw (talk | contribs) uploaded File:Screen Shot 2018-02-12 at 10.17.52 AM.png
- 23:24, 10 February 2018 Joshw (talk | contribs) uploaded File:Screen Shot 2018-02-10 at 6.17.46 PM.png
- 17:24, 8 February 2018 User account Sarj0 (talk | contribs) was created by Kristof (talk | contribs) (collaboration)
- 14:59, 6 February 2018 Kristof (talk | contribs) uploaded File:DaBL Safety Waiver.pdf
- 17:42, 5 February 2018 User account Alex M (talk | contribs) was created by Kristof (talk | contribs)
- 17:41, 5 February 2018 User account Joshw (talk | contribs) was created by Kristof (talk | contribs)
- 18:08, 1 February 2018 Kristof (talk | contribs) moved page Introdution to 3D CAD (with Fusion 360) to Introduction to 3D CAD (with Fusion 360) without leaving a redirect (correct spelling)
- 21:35, 11 January 2018 Kristof (talk | contribs) moved page Getting started to Getting started with wikis without leaving a redirect (previously too vague)
- 19:08, 5 January 2018 Kristof (talk | contribs) moved page Welcome to the Lab (recommended for all users) to Welcome to the Lab without leaving a redirect (name change (now required))
- 19:00, 5 January 2018 Kristof (talk | contribs) moved page Introduction to Milling with the Bantam Tools PCB Mill to Introduction to milling with the Bantam Tools PCB Mill without leaving a redirect (capitalization fix)
- 18:04, 3 January 2018 Kristof (talk | contribs) moved page List of tutorials to List of workshops without leaving a redirect (change of language)
- 19:01, 10 December 2017 Kristof (talk | contribs) moved page Milling with the Bantam Tools PCB Mill to Introduction to Milling with the Bantam Tools PCB Mill (Parity in certifications)